The POWER PLUS series is a series of LED spotlights with motion and light sensor from truEnergy. The series includes outdoor spotlights with a cold (6500K) glow temperature. This is the most suitable light for lighting an open space at night, as it imitates the light of the rising sun and is more easily perceived by the human eye after complete darkness. A bright directional luminous flux is provided by an LED matrix with high-quality type 2835 diodes. The product is suitable for use both indoors and outdoors, as it has a degree of protection of IP65. IP65 LED floodlights with sensor can be installed both indoors and outdoors.
Learn a little more about the motion and light sensors that POWER plus series models are equipped with. This is very convenient and contributes to additional cost savings. Such a spotlight turns on only at dusk and at night, it is triggered by movement. The distance within which the sensor is triggered is 10 meters, the timer is adjusted on the back of the sensor from 10 seconds to 7 minutes, if no movement is detected, the spotlight goes out. However, it is necessary to follow the recommendations on the distance between the spotlights with a motion sensor when installing (at least 10 meters apart). The motion and light sensor has an IP44 degree of protection, which allows it to remain operational when splashed in any direction, but despite this, it is still better to install a spotlight with a sensor under a canopy, roof or visor.
The housing of the LED floodlights with a motion sensor is an all-cast aluminum structure with a separately located sensor device. The aluminum body of the spotlight is both a stainless material, which is important for outdoor operation, and a good heat sink for LEDs, which increases their service life. The LED matrix is completely hermetically sealed with tempered glass, which can withstand ambient temperatures from -25 to +40. For mounting and installation on the body there is a movable bracket that allows the device to rotate 360 degrees. It can also be used to place a moisture-proof spotlight on a horizontal surface or to fix it to any vertical surface using conventional screws.
The range of applications of IP65 LED spotlights with motion sensor is quite wide and only continues to increase over time. Such devices are often used to illuminate places with periodic human traffic, including entrance areas of buildings, parking lots, garden paths and much more. The presence of a sensor is a significant reduction in the cost of paying for electricity. In addition to the sensor, LED streetlights themselves help to save electricity: the advantages can include a long period of operation of LED products. Such a spotlight will last at least 50,000 hours, this indicator is provided for continuous operation of the device for 7 years. This is a significant period of savings and excellent lighting.
truEnergy's series of LED spotlights with motion and light sensor POWER PLUS includes spotlights of various sizes and capacities, respectively: 10W, 20W, 30W. All products of the series fully comply with all quality standards of the Republic of the European Union. The products are certified and have a 2-year warranty.
