IP65 LED floodlights with sensor can be installed both indoors and outdoors. This model has a motion sensor and a light sensor. This is very convenient and contributes to additional cost savings. Such a spotlight turns on only at dusk and at night, it is triggered by movement. The distance within which the sensor is triggered is 10 meters, the timer is adjusted on the back of the sensor from 10 seconds to 7 minutes, if no movement is detected, the spotlight goes out. However, it is necessary to follow the recommendations on the distance between the spotlights with a motion sensor when installing (at least 10 meters apart). The motion and light sensor has an IP44 degree of protection, which allows it to remain operational when splashed in any direction, but despite this, it is still better to install a spotlight with a sensor under a canopy, roof or visor. The IP65 LED floodlight is suitable for outdoor use in all weather conditions. All mechanisms are reliably protected from dust and moisture, and are not afraid of water jets in any direction. It maintains operability at voltage and temperature fluctuations from -30° to +30°.
This model has a black aluminum body. The diode matrix is protected by tempered glass. The power of the 30W streetlight provides a bright directional luminous flux of 2400Lm. The color temperature of 6500K is cold white light. This glow tone is great for lighting streets and work areas where concentration is required, as it helps to increase efficiency and concentration.
