The FACADE series from truEnergy is a 220V outdoor LED strip that connects directly to the power grid. Like any 220 tape, ours has a completely sealed housing, which protects it from dust and moisture from any side. This series is represented by 220V tapes with a power of 7 and 9 W/m and a color temperature, the most popular for street lighting is 6000K. This is a cold light that simulates the rays of the sun at dawn, therefore, for lighting an open space at night, this is the most successful option, since such light does not hurt the eye and is as comfortable as possible for human vision.
The main feature of the LED SMD 220V ribbon is that its use is possible immediately after purchase. The absence of the need to connect a transformer allows not only not to overpay for its purchase, but also not to look for a place to hide it, not to clutter up excess space. The Facade series LED strip from truEnergy is connected to a regular outlet, and all you need is a cord to connect to the network, which is also available in our company's assortment. The tapes in this series use SMD 4040 LEDs in the amount of 100 pcs/m or 120 pcs/m. Not only the power of the tape depends on the number of diodes, but also the brightness of the luminous flux, as well as the area of the illuminated territory.
The products of this series have a packing of 100 m in a winding on a plastic coil. The desired length is achieved by cutting the LED strip with scissors or a knife in segments, the segment length is 1 meter. After the desired length is cut off, to maintain tightness, it is necessary to install a plug at the end of the product. Plugs, as well as mounting brackets, can also be purchased from our company. In other words, we have everything you need to have an outdoor LED strip installed, connected and served you for many years.
The use of outdoor LED strip in everyday life is the easiest way to illuminate or decorate the facade of a country house or backyard, as well as office and administrative buildings. The LED strip in silicone is very reliable and safe. At the same time, it bends quite easily, emphasizing and illuminating the required contours. Due to its plasticity, its use cases are very diverse. Often such a product is used to decorate facades or trees. Due to its moisture resistance, such a sealed LED strip 220 can be used not only as outdoor lighting, but also when decorating the backlight in the dressing rooms or shower rooms.
The IP65 outdoor LED strip is absolutely safe to use, and LED lighting will help reduce energy costs, and this is an important factor in our time.
You can always buy a 220V LED strip in a silicone case in our company. There is a sufficient number of products of this type in the warehouse in Minsk. We are confident in the quality of our street tape, so we give it a 1-year warranty.
If you do not know how to connect an LED strip to 220V, then you should know that, in fact, the installation of this product is easy to do with your own hands. The tape is attached with special clips, connectors are used to continue the line, a tight plug is put on one end of the LED strip to maintain full protection from moisture, and a power cord is attached to the second, which is connected directly to the network.
220 LED strip to buy in Europe
5 Reasons to Buy 220V Facade Series LED Strip from truEnergy:
1. High quality of the product. The moisture-proof LED strip from truEnergy is made using high-quality LED crystals. The heat sink is made of copper. Reliable protection is provided by high-grade silicone.
2. Wide application. The use of LED strip is possible both in damp and cold rooms, in gazebos and verandas, and outdoors. The ribbon can perform both lighting and decorative functions.
3. The degree of protection against dust and moisture is IP65. The products are not afraid of moisture and water jets in all directions. They maintain their performance in a wide temperature range.
4. Warranty. We are confident in the high quality of the Led strip. The IP65 outdoor LED strip from truEnergy has a one-year warranty.
5. Easy to install and connect. To connect a 220V LED strip, transformers and power supplies, additional power calculations and so on are not required. All installation and connection can be performed independently.
